Road Petroleum Asphalt
Low Viscosity Reinforcing Asphalt
Low Viscosity Reinforcing Asphalt
With preferred global quality imported raw materials, direct distillation process, and customized tire base impregnation process, the products have excellent high-temperature performance, heat resistance, reinforcing, non-separation, and non-delamination properties, to meet the performance of all the national standards and the needs of the coil application scenarios, thus saving the energy consumption by nearly 20% for unit area tire coils.
Advantages
1. Standard customization: Customized base impregnation products, to meet the needs of all models of national standard impregnation of tires on the coil.
2. High efficiency and durability: Ensure the coils have 105 ℃ high-temperature heat resistance, anti-oil seepage property, and component compatibility to prevent the coating layer from debonding, with long-lasting waterproofing and water seepage resistance;
3. Green and low-carbon: No batching process, directly used as a tire base impregnated asphalt, saving the energy consumption by nearly 20% for unit area tire coils;
4. High stability: With high thermal storage stability, the components do not segregate, and the asphalt does not delaminate.
Saving the energy consumption by nearly 20% for unit area tire coils
Products softening point> 65 ℃
Heat resistance 105 ℃
Applications
Waterproofing asphalt membrane (tire base impregnation)
Parameters
| Item | Unit | Y-68 | Y-71 | Y-81 | Test Method | |
| Softening point≥ | ℃ | 65 | 70 | 75 | T0606 | |
| 135℃ Rotation viscosity≤ | mPa ·s | 3500 | 5000 | 6500 | T0625 | |
| Flash point (COC)≥ | ℃ | 260 | 260 | 260 | T0611 | |
| Solubility (trichloroethylene)≥ | % | 99 | 99 | 99 | T0607 | |
| 15℃ Density | g/cm | On-the-spot measurement | On-the-spot measurement | On-the-spot measurement | T0603 | |
| Film oven aging | Mass change≤ | % | ±0.5 | ±0.5 | ±0.5 | T0609 |
| Penetration ratio≥ | % | 70 | 70 | 70 | T0604 | |
| Heat resistance (105℃, 2h) | / | No obvious oil leakage or dripping | Q/371625 JBSH008 Appendix A | |||
| Oil permeability (105℃, 5h) ≤ | Pages | 4 | 4 | 4 | Q/371625 JBSH008 Appendix B | |